PRODUCTS

> MeshAP 5100 Outdoor - Dual 5GHz and Single 2.4GHz Full-Duplex Wi-Fi Mesh Access Point

> MeshAP 3100G Outdoor - Dual 5GHz and Single 2.4GHz Full-Duplex Wi-Fi Mesh Access Point with built-in GPS Antenna

>MeshAP 3100 Outdoor - Dual 5GHz and Single 2.4GHz Full-Duplex Wi-Fi Mesh Access Point

> MeshAP 2180 Outdoor - High Performance 2.4GHz Full-Duplex Wi-Fi Mesh Network Access Point

> MeshAP 2100 Outdoor - 2.4GHz Full-Duplex Wi-Fi Mesh Network Access Point

> MeshAP 1100 Indoor - 2.4GHz Full-Duplex Wi-Fi Mesh Network Access Point

> MeshAP Manager Web (HTML) based GUI Management Tool for MeshAP Access Points

SUPPORT

> Downloads
>
Warranty
> FAQ
> Product Registration
> Update Request


Where To Buy

> Online Store


Technical Support
> support@arrowspan.com

Information
> info@arrowspan.com

Webmaster
> webmaster@arrowspan.com

Feedback
> feedback@arrowspan.com

 

 

Home > Support > FAQ

FAQ

Q: How do I enable WEP on the MeshAP Access Point?

The default setting of the wireless security mode for the MeshAP unit is "Disable." To configure WEP data encryption, follow these steps:

Step 1. Go to the Security section.

Step 2. Use the drop down menu to select WEP Mode.

Step 3. Select the Encryption Strenght, and Select 64-bit or 128-bit encryption.

Note: You can manually or automatically program the four data encryptions to be identical on all PCs and access points in your network.

Step 4. To automatically program the data encryption, enter a Passphrase in the Passphrase field and Click "Generate" to generate the WEP key.

Step 5. Click "Save Settings and Apply" to apply the new setting.

 

> Back to FAQ

 

Copyright ©2006 ArrowSpan, Inc. All rights reserved. Privacy Policy